PRODUCTS
MEASUREMENT AND CONTROL ELEMENTS
CONTROL AND SHUTOFF VALVES
The electric actuator is a process control device that receives a command from the automation systems to operate shut-off or modulating valves, with high precision and safety.
PRODUCTS
Electric actuators
Electric actuators incorporate a combination of electric motor and speed reductor gearbox, specially developed and designed for the automation of valves, which transmits the torque necessary to actuate the 1/4 turn, multiturn or linear valve. It has a handwheel, which is part of the standard equipment, allows the valve to be operated manually.
The actuator records the valve stroke and torque data. An internal control unit evaluates this data and takes care of connecting and disconnecting the actuator. This control is usually integrated into the actuator and incorporates, in addition to the electrical interface to the automation system, a local control unit.
 11.33.40.png)
Multi-turn actuators SA and SAR
The multi-turn actuators of the SA series are designed for open - close service and positioning service (classes A and B) / (short operation S2 - 15 min).
The SAR series multi-turn actuators are designed for S4 - 25% regulating service (class C).
The actuators of the SA / SAR series can be combined with different controls: From the simple open - close control to the model with a microcontroller with service data recording or with a fieldbus interface.
SA design features
SPECS
Torque range from 10 Nm to 32,000 Nm
Output speeds from 4 to 180 r.p.m.
Struck and torque record
Three-phase, alternating and direct current motors
Handwheel for manual operation
SAR design features
SPECS
Torque range from 15 Nm to 4,000 Nm
Regulating torque range from 15 Nm to 1 600 Nm
Number of starts max. 1 200 c / h
Output speeds from 4 to 90 r.p.m.
Struck and torque record
Three-phase and alternating current motors
Handwheel for manual operation
 12.25.32.png)
Variable speed actuators SAV and SARV with AC
With SAV .2 multi-turn actuators for on-off service and SARV .2 for regulating service combined with ACV 01.2 intelligent control, the established SA / SAR series is expanded with adjustable speed variants. With a wide 1:10 speed regulation ratio, AUMA sets new standards.
The multi-turn actuators of the SAV series are designed for on-off duty and positioning service (classes A and B) / (short operation S2 - 15 min). We have a special design for longer running times for S2 - 30 min operation.
The multi-turn actuators of the SARV series are designed for (class C) S4 - 25% regulating service. We also have special designs for S4 - 50%.
SAV design features
SPECS
Torque range from 10 Nm to 1 000 Nm
Output speeds from 6 to 240 r.p.m.
Struck and torque record
Three-phase current motors
Handwheel for manual operation
SARV design features
SPECS
Torque range from 15 Nm to 1 000 Nm
Regulating torque range from 15 Nm to 350 Nm
Number of starts max. 1,500 c / h
Output speeds from 6 to 240 rpm
Struck and torque record
Three-phase current motors
Handwheel for manual operation
High positioning accuracy
 11.33.48.png)
SQ part-turn actuators
Part-turn electric actuator for 1/4 turn butterfly, ball or similar valves, for open-close or positioning service.
Design features
SPECS
Torque range from 50 Nm to 2 400 Nm
Opening Angle from 75 ° to 105 °
Maneuvering times for 90 ° from 4s to 100s
Three-phase and alternating current motors
Struck and torque record
Handwheel for manual operation
Mechanical position indicator
 12.36.03.png)
SQ and SQR ¼-turn actuators
The SQ series part-turn actuators are designed for open-close and positioning service (classes A and B) / (short operation S2 - 15 min). The SQR series part-turn actuators are designed for S4 - 25% regulating (class C) duty. The SQ / SQR series actuators have an option with a fieldbus interface.
Design features
SPECS
Torque range from 50 Nm to 2 400 Nm
Regulating torque range from 75 Nm to 1200 Nm
Maximum number of starts of 1,500 cycles / hour
Opening Angle from 75 ° to 105 °
Maneuvering times for 90 ° from 4s to 100s
Travel and torque record
Three-phase and alternating current motors
Handwheel for manual operation
 11.33.54.png)
SA multi-turn actuators with mounted gear unit
The assembly of AUMA gearboxes broadens the application spectrum of SA multi-turn actuators.
SPECS
Torque range from 120 Nm to 1 600 Nm
Handwheel for manual operation
High degree of protection from environment
High-quality anti-corrosion protection
Wide room temperature ranges
Electrical connection via compact Auma connector (alternatively, terminals)
Cable entry of different models
Couplings according to DIN and EN ISO
 12.40.59.png)
Fail-Safe Unit FQM and FQMEx
With the Fail-Safe FQM unit, AUMA offers an innovative and safe actuator solution to automatically actuate valves in an emergency with the help of mechanical energy. Constant torque curve with torques from 150 Nm to 1200 Nm.
The spring does not move in normal operation, allowing a correspondingly small dimensioning of the actuator.
The end position switches are set automatically with the setting of the end positions OPEN and CLOSED and do not have to be set separately.
FQM design features
SPECS
Torque range 150 Nm to 1,200 Nm
Opening angle from 80 ° to 100 °
Maneuvering times from 8 s to 54 s
 11.34.00.png)
Multiturn actuators SA with linear unit LE
By mounting a linear unit LE on a multi-turn actuator SA, a linear actuator, also called a push actuator, is achieved.
Electric linear actuators for the execution of a linear movement, E.g. in valves, they can be a combination of the multi-turn actuator SA with the linear unit LE. If a bar is to be actuated, the LE linear unit can also be mounted on a base.
Design features
SPECS
Thrust forces from 4 kN to 217 kN
Strokes from 50mm to 500mm
Maneuvering speeds from 20 mm / min to 360 mm / min
Handwheel for manual operation
 12.56.52.png)
GST helical gear reducers
When the input shaft must work offset from the output shaft, combinations of SA multi-turn actuators with AUMA GST helical gear reducers are used.
This allows multiplying the output torque.
Design features
SPECS
Planetary helical gear reducer for torques up to 16,000 Nm
Service life according to DIN EN 15714-2
Coupling according to EN ISO 521
Suitable for manual and electric operation
Suitable for room temperatures from -40 ° C to + 80 ° C
High-quality corrosion protection by AUMA powder coating
Stainless input shaft
IP66 protection
