PRODUCTS
MEASUREMENT AND CONTROL ELEMENTS
INSTRUMENTS AND ANALYZERS
ENVEA - SWR has designed a basket of products for the measurement and detection of powders and granulates for different applications in industrial processes such as filter efficiency, dust recovery in bag filters, mass flow measurement of various dry products.
The application of these products contributes to the efficiency, quality and reduction of emissions to the environment in industrial processes.
PRODUCTS
Continuous dust measurement with electrodynamic measuring principle
ProSens Series
DETAILS
Dust measurement in any pipe or duct, including large diameter
Minimum flow velocity of 4 m / s
Measuring range from 0.1 mg / m3
Process temperature of 150° C with an option of up to 500° C
Sensor rod made of stainless steel with lengths from 500 to 1000 mm
Dust concentration output as trend or absolute value
IP66 protection; ATEX cat. ½ GD
Measurement of dust concentration at high temperatures
Continuous dust measurement after cleaning filters
Mass flow measurement for granulates and dry powders
MaxxFlow HTC Series
DETAILS
Most non-metallic solids can be measured
Can be installed in round pipes or ducts
No actual upper limit of mass flow
Maximum pressure 10 bar
Dust proof
No flow restrictions (wear resistant ceramic liner)
Mass flow measurement is independent of flow characteristics
Maximum temperature, 120° C
Can be installed at an angle
Small size, 220 mm (DN 100), 290 mm (DN 150), 310 mm (DN 200)
No moving parts, therefore no maintenance
Easy to calibrate
Mass flow application in chips
Mass flow application gypsum
