Vibration monitoring

Industrial vibration monitoring solutions, for rotating machinery.

• Fans
• Turbines
• Generators
• Pumps
• Engines
• Centrifugal compressors
• Reciprocating compressors
• Turbo machinery in general

Seismic sensors

SA6200A API 670

SA6200A Series

SPECS

2% accuracy

100 mV / g sensitivity

Response frequency:
2 to 5 kHz (± 5%)
1.5 Hz to 7.5 kHz (± 10%)
0.5 Hz to 10 kHz (± 3dB)

+/- 5 Volts voltage output full scale

Excitation current: 2 to 20 mA

316L stainless steel casing

Hermetically welded seal

Certified for dangerous areas CSA, ATEX

Limit temperature range from -55 ° C to + 120 ° C

Proximity

Digital proximity systems

Metrix digital proximity system (DPS) combines an induced eddy-current proximity sensor with the flexibility of digital configurability.

DPS MX2034

SPECS

Digitally configurable

Total compliance with API 670

Less spare parts inventory

Interchangeability

Support system for old probes

Accuracy 0.3 %

Working temperature from -40 to 85 °C

Relative humidity of 95 %, without condensation

Velocity

Seismic

Seismic velocity transmitter with a piezoelectric seismic sensor, integrator, RMS spike detection, signal conditioner for 4-20 mA in one single unit.

ST5484E Series

SPECS

Stainless Steel case 303 (standard), 316 (optional)

Output 4 to 20 mA

Voltage input from 11 to 30 VDC

Precision of +/- 2.5 % (no passband )

Working temperature from -40 to 100 °C

95 % humidity without condensation

Certification option for dangerous zones CSA, ATEX, IECEx, INMETRO or GOST

ST5491E Series

SPECS

Stainless Steel case 303 (standard), 316 (optional)

2.5 digit screen in ips or mm/2

Output 4 to 20 mA

Voltage input from 13 to 30 VDC

Precision of +/- 2.0 % (no pass band)

Working temperature from -10 to 70 °C

For dangerous zones according to CSA

Switches

The electronic switch utilizes a solid state crystal accelerometer which provides an electrical output when it is deformed by the vibration forces.

440 Series

SPECS

Frequency range from 2 to 1,000 Hz

Analog output 4 to 20 mA

Precision +/- 10% adjusted

NEMA 4X Protection

100 % Humidity (no condensation)

Temperature limit -30 °C to +60 °C

ECN Automation
offers comprehensive solutions.

Contact us